Knowledge Center
- Downloads
- Technical Newsletter
- Recommended Guidelines and References
- Specifications
- Technical Papers
- Tools and Calculators
- Training
- Articles, Tips and Requirements
- An Integrated Approach to Manage Vibration Risks
- Design Requirements for Reciprocating Compressors
- Evaluating Compressor Operating Risks
- Five simple methods to check reciprocating compressor performance
- Important Differences in Pulsation Software
- Liquid Pumping Systems (Including Liquid Pipelines)
- Noise Regulations Around the World
- Noise Risks in the Gas Industry
- Performance Monitoring Examples
- Pipe Support Stiffness, GMRC Project
- Piping Vibration Design Considerations
- Piping Vibration Examples
- Structural Vibration and Ways to Avoid It
- Tips for a Successful Project (Vibration Control)
- Transient Conditions on Small-Bore Piping
- Vendor Requirements for Piping Vibration & Integrity Assessment
- Vibration-induced fatigue (whitepaper)
- Vibration Issues Affecting Gas Compressor Facilities
- Ask the expert
Webinar: Turning the Screw
How to control screw compressor pulsation
Watch the recording of our free webinar and learn how to minimise the risk of vibration-related failures on screw compressor packages.
We discuss vibration and pulsation effects from screw compressors, supported with a case study involving oil-flood screw compressor packages.
By the end of the session you will learn about:
- The initial assessment and shell-mode vibration measurements
- Simulation results and solutions to reduce pulsation-induced forces and vibration response
- Implementation of recommendations and resolution of the problem
- Lessons learned and best practices to avoid pulsation problems in new and existing installations
Background
Screw compressors in industrial applications compress large volumes of gas at high ratios. This rotary-type positive-displacement process creates a steadier flow than reciprocating compressors, but the risks of vibration and fatigue failure remain.
Application
Purchasers and operators of screw compressors can apply the recommendations presented in this webinar to minimise the risk of vibration-related failures on screw compressor packages.
Who should attend
This webinar is relevant to packagers, project managers overseeing the design or retrofit of screw compressor installations as well as owners and operators.
The session takes approximately 60 minutes.
Related Pages
Training courses and webinars • Pulsation & Mechanical Analysis: Screw Compressor • Field engineering and troubleshooting •
Free webinar
Learn how to solve complex vibration problems with advanced troubleshooting techniques to keep your facility running smoothly, with minimal downtime. Watch now
