- Acoustic Fatigue Assessment for Blowdown Systems(API Std 521 for pressure relief and blowdown valves)
- Acoustic-Induced Vibration (AIV) Analysis(Acoustic Induced Excitation Analysis)
- Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD)(Advanced Engineering Analysis and Simulation)
- Flow-Induced Turbulence (FIT) Analysis(for High Kinetic Energy Flow)
- Flow-Induced Vibration (FIV) Analysis(Design Analysis and Field Troubleshooting)
- Multiphase and Slug Flow Analysis(Impact on fatigue and dynamic stress in piping systems)
- Pipe Stress Analysis(Thermal Analysis, Piping Flexibility Analysis)
- Piping Vibration and Integrity Assessment(per EI Guideline, 2008, Avoidance of Vibration Induced Fatigue Failure (AVIFF))
- Review & Design Support Services(Vibration & Integrity Review; FEED, Project Planning)
- Small-Bore Connections (SBC) Assessment(for all machinery types and applications)
- Structural Vibration and Dynamic Design Analysis(for FPSOs, Platforms, Elevated Structures)
- Subsea Piping Vibration(For new and existing systems)
- Thermal Striping(High-cycle thermal strain in liquid mixing piping)
- Veridian AM(Vibration anomaly manager)
- Veridian VS(Free, web-based piping vibration screening tool)
- Vibration Inspection Program(Site Assessment, Piping Integrity, Baseline Survey, AVIFF)
- Water Hammer Analysis(Transient Analysis for Liquid Systems)
Vibration, dynamics and noise
formerly BETA Machinery Analysis and SVT Engineering Consultants
The following engineering and field services are available on a stand-alone basis or as a combination of studies.
Download our list of servicesor visit our Industryor Machinery/Pipingpages for advice on which combination of services may be required for your situation.
Services
-
Static Equipment & Structures (Piping Vibration & Fatigue)
-
Machinery Analysis
- Bottle Sizing Service(Free Online Sizing Tool, for Reciprocating Compressors)
- Compressor Package Engineering(Design Support for Reciprocating Compressors)
- Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD)(Advanced Engineering Analysis and Simulation)
- Foundation Design and Dynamic Analysis(Including Concrete, Gravel, and Piles)
- Fuel Gas Compressor Piping Transient Analysis(Evaluate Transient Flow at Gas Turbine Inlet)
- Lateral Vibration Analysis(Rotordynamics, Critical Speed, and Stability Analysis)
- Pipe Stress Analysis(Thermal Analysis, Piping Flexibility Analysis)
- Pulsation & Mechanical Analysis: Reciprocating Compressor(per API 618, API 688, and GMRC Guideline)
- Pulsation & Mechanical Analysis: Reciprocating Pump(per API 674, API 688)
- Pulsation & Mechanical Analysis: Screw Compressor(Including rotary compressors and Roots blowers)
- Pump RCF Analysis(Reed Critical Frequency)
- Review & Design Support Services(Vibration & Integrity Review; FEED, Project Planning)
- Shell Transverse Acoustical (STA) Analysis(Vibration/Noise on Vessels and Piping Walls)
- Skid Design and Analysis(Lifting, Environmental Loading; Static and Dynamic Design)
- Surge Control Design for Centrifugal Compressor Systems(Three levels of dynamic surge analysis)
- Torsional Vibration Analysis (TVA)(for Compressors, Pumps, Engines)
-
Rotating Equipment Reliability
- Condition Monitoring and Remote Vibration Analysis(for Troubleshooting Support or CBM Applications)
- Machinery Condition and Performance Monitoring(Monitor, Analyze, Optimize)
- Performance Assessment (Thermodynamic)(Field Evaluation of Compressors, Pumps)
- Review & Design Support Services(Vibration & Integrity Review; FEED, Project Planning)
- Veridian iDAC(Intelligent data acquisition)
-
Noise Management
- Environmental Noise Impact Assessment(Environmental noise approval support)
- Human Vibration(Health & safety compliance)
- Noise Design Studies(Noise control and acoustical design services)
- Noise Management and Control – Service Overview(Environmental and occupational noise solutions)
- Noise Troubleshooting(Noise mitigation)
- Occupational Noise Management(Health & safety noise compliance, Strategic exposure elimination and reduction)
- Underwater Noise Monitoring and Assessment(Offshore, port and subsea noise management)
-
Field Engineering & Troubleshooting
- Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD)(Advanced Engineering Analysis and Simulation)
- Human Vibration(Health & safety compliance)
- Motion Amplification Vibration Analysis(For improved vibration analysis of piping, machinery and structures)
- Noise Troubleshooting(Noise mitigation)
- Performance Assessment (Thermodynamic)(Field Evaluation of Compressors, Pumps)
- Structural Vibration Troubleshooting(Improving Integrity and Reliability on Offshore Production Platforms/FPSO)
- Thermal Striping(High-cycle thermal strain in liquid mixing piping)
- Troubleshooting, Root Cause Analysis (RCA)(Advanced vibration analysis including pulsation, resonance, stress and transients)
- Veridian iDAC(Intelligent data acquisition)
- Vibration Inspection Program(Site Assessment, Piping Integrity, Baseline Survey, AVIFF)
-
Solutions and training
-
Anti-Vibration Products
-
Training
- Training courses and webinars(Register for our training courses and webinars)
- Webinar: (Digital) reliability = profitability(How business intelligence tools can improve the reliability and performance of rotating equipment assets)
- Webinar: Feeling the pulse(Reciprocating compressor system design: how to avoid pulsation pitfalls in suction and discharge piping systems)
- Webinar: Pump it up, damp it down(How to select the best dampener for your reciprocating pump system)
- Webinar: Shake, rattle and grow I (2022 update)(Pipe stress and vibration design)
- Webinar: Shake, rattle and grow – part II(How to select the right pipe clamp to control vibration and allow thermal growth)
- Videos and Animations
